Description

The above two models are used for vacuuming the air and nitrogen in switchgear and gas inflation into cylinder. The system vacuuming rate is available in the range of 40~100m³/h, with the final true emptiness <2x10^-3mbar~1mbar and is equipped with a high-precision vacuum sensor. The system and pipeline are designed with self-sealing structure which enable it to avoid the bad mixture of gas generation and to ensure the best performance of SF6 quality.

Features

• Fixed and steerable rubber wheels for easy movement
• DN20 self-sealing joint design
• Flexible Performance Configuration
• Equipped with a vacuum pump to protect the solenoid valve
• High precision display of vacuum value

Specifications

Vacuum pump 60m³/h, <1mbar

1 ~ 1.5 Mpa pressure gauge

High precision vacuum pressure digital displayed vacuum gauge Mbar

Vacuum ball valve DN20

Electric control box (with three-phase fuse protection)

DN20 self-sealing connector

5m DN20 self-sealing vacuum hose at both ends

5m DN20 Single-end self-sealing inflatable hose with hand valve

10M waterproof cable

High precision vacuum gauge

Size: 900mm L: 650mm W: 1000mm H

Operation voltage :380~460V 50Hz AC

Noise:<75dB(A)

Optional accessories

Vacuumizing solenoid valve (instead of ball valve)

40m³/h vacuum pump, <1mbar

100m³/h vacuum pump, <1mbar

40m³/h vacuum pump, double stage <2x10-3mbar

60m³/h vacuum pump, double stage <2x10-3mbar

Vacuum pump anti-freezing heating belt

Cylinder heating belt